Whether your dryer hose is old, worn or
you simply want to replace it for a newer, safer metal version, I can show you
how to do it, it's easy.
1. Pick up a
replacement hose. It should be at least four inches wide and then should be the
right length for the space. Ducts that are too long or too narrow can be a fire
hazard.
2. Unplug the
dryer. Then remove the old duct. Some are held in place by large hose clamps,
others by clamps at the machine and the vent.
3. Clean both the
dryer outlet and exhaust pipe. These two areas can become clogged with dust and
lint. A vacuum or a bottle brush with a length of nylon stocking over it should
do the trick.
4. When everything
is completely clean it's time to install the new duct. Simply extend it to it's
full length and then place it on the opening on the back of the dryer and then
to the vent that leads to the outside. NOTE: The ductwork should have no more
than two ninety-degree angles to provide maximum airflow and to prevent lint
build-up.
5. Move the dryer
back into position and plug it in.
No comments:
Post a Comment